ATL and BSA Series

Right angle design linear actuators

Rear hinged attachments. High precision worm gearbox, ZI involute profile.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).

ATL Series acme screw drive linear actuators:

11 standard sizes available
Acme screw from Ø 13,5 mm to Ø 120 mm
Linear speed from 1,4 mm/s to 140 mm/s
Load capacity from 4 kN to 600 kN
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Performances with Duty Cycle Fi = 30 % over 10 min at ambient temperature 25 °C

BSA Series ball screw drive linear actuators:

11 standard sizes available
Ball screw from Ø 14 mm to Ø 120 mm
Linear speed from 2,3 mm/s to 100 mm/s
Load capacity from 4 kN to 600 kN
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Performances with Duty Cycle Fi = 1000 % over 10 min at ambient temperature 25 °C

Available accessories (*):

Stroke length limit device (electric, magnetic or inductive proximity)
Incremental or absolute encoder for positioning control
Prepared for IEC standard motors, AC or DC motors
Anti-turn device
Safety clutch
Safety nut
Protective bellows

More option upon request (*):
Push rod in stainless steel AISI 304
Outer tube in stainless steel AISI 304
Lubricants for high or low ambient temperature
Lubricants suitable for food industry
VITON or silicone special seals
Wiper seal on push rod with second lip in brass (ice scrapers)

(*) Always check with our technical support the feasibility of the required option and accessories

Download